Where Is The Fuel Filter On A 94 Ford Ranger

How exercise I Change a Fuel Filter in a 1995 Ford Ranger XLT?

by Baptist Johnson

cherry truck engine epitome past Christopher Nolan from Fotolia.com

Changing the fuel filter on a Ford Ranger XLT is a simple, all the same important, component of vehicle maintenance. The fuel filter is the role of the fueling system that strains your fuel for dirt and rust particles. Over time, your fuel filter can become clogged with dirt and must be replaced. You lot should alter your fuel filter every 25,000 miles or during every tune-up to keep your Ranger in expert driving condition.

Step 1

Park your Ford Ranger on level ground in a safe area. Apply the parking brake to prevent your truck from rolling while you lot are performing the task. Open up the hood and disconnect the negative bombardment cable. Unscrew the gas filler cap.

Step 2

Crawl underneath your Ford Ranger from the driver's side. Locate your fuel filter housing unit under the driver's seat. Your fuel filter is a silverish or black cylinder attached to a black hose at both ends. This hose is your fuel line.

Step iii

Remove the bolts that secure the fuel filter to the mounting subclass that partially surrounds the fuel filter housing unit of measurement with an adjustable wrench. Set the bolts aside. You should now have clear access to your fuel filter housing unit.

Step 4

Loosen the retaining clips with a screwdriver. These are the clamps that comprehend the connection between the fuel filter and the fuel line.

Footstep five

Apply pressure to the button connexion fitting to release the fuel filter from the fuel line. The push button connection fitting is a small-scale subclass with a white arrow printed on it. Remove the fuel filter in one case it has disengaged from the fuel line.

Step six

Supervene upon the sometime fuel filter with a new fuel filter. Connect the new fuel filter to the fuel line by pushing the ends of the fuel filter into the fuel line. When you connect the new fuel filter, brand sure the white arrows on the fuel filter are pointing toward to the front of your truck. Yous should hear a click when your fuel filter is secured to the fuel line.

Footstep 7

Reconnect the retaining clips over the connection betwixt the fuel filter and the fuel line with a screwdriver. Secure the fuel filter to the mounting bracket with an adjustable wrench and the set of bolts.

Spiral your gas filler cap to the fuel tank and connect the negative battery cables.

Things Y'all'll Need

Warnings

Writer Bio